Home › Code lookup › P2423
Powertrain code · Emissions

P2423 HC Adsorption Catalyst Efficiency Below Threshold Bank 1

How urgent? Book a check when convenient

What it means

A special catalytic converter on bank 1 (the side of the engine with cylinder 1) that stores unburned fuel (hydrocarbons) during cold starts isn't working as well as it should. This part is used on some low-emission vehicles.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Check for misfire codes and exhaust leaks first
  2. Check sensor readings related to the catalyst

Signs you may notice

  • Check engine light on
  • Usually no change in how the car drives
  • May fail an emissions inspection

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonWorn or damaged hydrocarbon trap catalyst
  • CommonFaulty sensor monitoring the catalyst
  • PossibleExhaust leak near the catalyst
  • PossibleEngine misfire or oil burning that damaged the catalyst

Typical repair once the cause is confirmed

Fix any misfire or leak first; a worn catalyst must be replaced.

Common questions

What does P2423 mean?

A special catalytic converter on bank 1 (the side of the engine with cylinder 1) that stores unburned fuel (hydrocarbons) during cold starts isn't working as well as it should. This part is used on some low-emission vehicles.

Can I drive with code P2423?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes P2423?

Common possibilities to test include: worn or damaged hydrocarbon trap catalyst; faulty sensor monitoring the catalyst; exhaust leak near the catalyst; engine misfire or oil burning that damaged the catalyst. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.