Home › Code lookup › P2428
Powertrain code · Emissions

P2428 Exhaust Gas Temperature Too High Bank 1

How urgent? Get it checked in the next few days

What it means

The exhaust on bank 1 (the side of the engine with cylinder 1) is getting hotter than is safe. This can damage the turbo, catalytic converter or particulate filter.

Can I keep driving?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Check exhaust temperature sensor readings against each other
  2. Check for exhaust restrictions and leaking injectors

Signs you may notice

  • Check engine light on
  • Reduced engine power
  • Possible hot or burning smell

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonEngine overfueling or a leaking injector
  • CommonClogged particulate filter or exhaust restriction
  • PossibleFaulty exhaust temperature sensor
  • PossibleBoost leak or turbo problem

Typical repair once the cause is confirmed

Fix the cause of the high exhaust heat, such as a leaking injector or clogged filter; replace the sensor only if it reads wrong.

Repair costInsufficient verified pricing for this vehicle and repair
Replace exhaust gas temperature sensor. Prepare an itemized shop request.
Walk through it step by step: Reduced engine power / limp mode →

Common questions

What does P2428 mean?

The exhaust on bank 1 (the side of the engine with cylinder 1) is getting hotter than is safe. This can damage the turbo, catalytic converter or particulate filter.

Can I drive with code P2428?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What causes P2428?

Common possibilities to test include: engine overfueling or a leaking injector; clogged particulate filter or exhaust restriction; faulty exhaust temperature sensor; boost leak or turbo problem. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.