Home › Code lookup › P242F
Powertrain code · Emissions

P242F Diesel Particulate Filter Restriction - Ash Accumulation

How urgent? Get it checked in the next few days

What it means

The diesel particulate filter has collected so much ash (left over from burned oil additives) that it is restricted. Unlike soot, ash can't be burned off, so the filter needs cleaning or replacing.

Can I keep driving?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Check DPF pressure readings with a scan tool
  2. Check for oil consumption

Signs you may notice

  • Check engine light on
  • Reduced engine power
  • Frequent regeneration

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonNormal ash buildup in a high-mileage filter
  • CommonEngine burning oil, adding extra ash
  • PossibleFaulty DPF pressure sensor or hoses

Typical repair once the cause is confirmed

Have the filter professionally cleaned or replaced, and fix any oil burning.

Repair costInsufficient verified pricing for this vehicle and repair
Replace diesel particulate filter. Prepare an itemized shop request.

Where it shows up

  • Seen on high-mileage Ram Cummins and GM Duramax diesels
Walk through it step by step: Reduced engine power / limp mode →

Common questions

What does P242F mean?

The diesel particulate filter has collected so much ash (left over from burned oil additives) that it is restricted. Unlike soot, ash can't be burned off, so the filter needs cleaning or replacing.

Can I drive with code P242F?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What causes P242F?

Common possibilities to test include: normal ash buildup in a high-mileage filter; engine burning oil, adding extra ash; faulty dpf pressure sensor or hoses. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.