Home › Code lookup › P2431
Powertrain code · Emissions

P2431 Secondary Air Injection System Air Flow/Pressure Sensor Circuit Range/Performance Bank 1

How urgent? Book a check when convenient

What it means

The secondary air injection pressure sensor (bank 1) is giving readings that don't make sense compared with what the computer expects. This sensor checks that the air pump is blowing fresh air into the exhaust during cold starts. The sensor may be failing or the system it watches may have a real problem.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Compare the secondary air sensor reading with related sensors in live data
  2. Check wiring and connector for corrosion or looseness

Signs you may notice

  • Check engine light on
  • Usually no change in how the car drives
  • May fail an emissions inspection

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonFailing or out-of-calibration secondary air injection pressure sensor
  • CommonWeak air pump, stuck valve or blocked air passages
  • PossibleHigh resistance in the wiring or connector

Typical repair once the cause is confirmed

Confirm the system itself is working, then replace the secondary air injection pressure sensor if its readings are off.

Repair costInsufficient verified pricing for this vehicle and repair
Replace secondary air injection pressure sensor. Prepare an itemized shop request.

Common questions

What does P2431 mean?

The secondary air injection pressure sensor (bank 1) is giving readings that don't make sense compared with what the computer expects. This sensor checks that the air pump is blowing fresh air into the exhaust during cold starts. The sensor may be failing or the system it watches may have a real problem.

Can I drive with code P2431?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes P2431?

Common possibilities to test include: failing or out-of-calibration secondary air injection pressure sensor; weak air pump, stuck valve or blocked air passages; high resistance in the wiring or connector. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.