Home › Code lookup › P2437
Powertrain code · Emissions

P2437 Secondary Air Injection System Air Flow/Pressure Sensor Circuit Low Bank 2

How urgent? Book a check when convenient

What it means

The signal from the secondary air injection pressure sensor (bank 2) is lower than the computer expects. This sensor checks that the air pump is blowing fresh air into the exhaust during cold starts. A wire shorted to ground or a failed sensor is the usual reason.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Inspect the secondary air sensor wiring for rubbed-through or pinched spots
  2. Unplug the sensor and see if the reading changes, which helps separate wiring from sensor

Signs you may notice

  • Check engine light on
  • Usually no change in how the car drives
  • May fail an emissions inspection

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonSignal or reference wire shorted to ground
  • CommonFailed secondary air injection pressure sensor
  • PossibleCorroded or damaged connector
  • PossibleEngine computer problem (rare)

Typical repair once the cause is confirmed

Repair any damaged wiring or connector first; if the circuit tests good, replace the secondary air injection pressure sensor.

Repair costInsufficient verified pricing for this vehicle and repair
Replace secondary air injection pressure sensor. Prepare an itemized shop request.

Common questions

What does P2437 mean?

The signal from the secondary air injection pressure sensor (bank 2) is lower than the computer expects. This sensor checks that the air pump is blowing fresh air into the exhaust during cold starts. A wire shorted to ground or a failed sensor is the usual reason.

Can I drive with code P2437?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes P2437?

Common possibilities to test include: signal or reference wire shorted to ground; failed secondary air injection pressure sensor; corroded or damaged connector; engine computer problem (rare). A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.