Home › Code lookup › P2445
Powertrain code · Emissions

P2445 Secondary Air Injection System Pump Stuck Off Bank 1

How urgent? Book a check when convenient

What it means

The secondary air pump, which blows fresh air into the exhaust for a short time after cold starts, seems stuck off.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Check the air pump fuse and relay
  2. Listen for the pump at a cold start and check that it shuts off

Signs you may notice

  • Check engine light on
  • Usually no change in how the car drives
  • May fail an emissions inspection

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonFailed secondary air pump (often water damaged)
  • CommonBlown fuse or failed pump relay
  • PossibleStuck switching valve or faulty pressure sensor
  • PossibleEngine computer problem (rare)

Typical repair once the cause is confirmed

Replace the failed pump, relay or valve and repair any wiring fault.

Repair costInsufficient verified pricing for this vehicle and repair
Replace secondary air injection pump. Prepare an itemized shop request.

Known on these vehicles

Common questions

What does P2445 mean?

The secondary air pump, which blows fresh air into the exhaust for a short time after cold starts, seems stuck off.

Can I drive with code P2445?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes P2445?

Common possibilities to test include: failed secondary air pump (often water damaged); blown fuse or failed pump relay; stuck switching valve or faulty pressure sensor; engine computer problem (rare). A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.