Home › Code lookup › P2446
Powertrain code · Emissions

P2446 Secondary Air Injection System Pump Stuck On Bank 2

How urgent? Book a check when convenient

What it means

The secondary air pump, which blows fresh air into the exhaust for a short time after cold starts, seems stuck on.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Check the air pump fuse and relay
  2. Listen for the pump at a cold start and check that it shuts off

Signs you may notice

  • Check engine light on
  • Air pump keeps running or whining after start-up
  • May fail an emissions inspection

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonStuck air pump relay
  • CommonShorted pump control wiring
  • PossibleStuck switching valve or faulty pressure sensor
  • PossibleEngine computer problem (rare)

Typical repair once the cause is confirmed

Replace the failed pump, relay or valve and repair any wiring fault.

Repair costInsufficient verified pricing for this vehicle and repair
Replace secondary air injection pump. Prepare an itemized shop request.

Common questions

What does P2446 mean?

The secondary air pump, which blows fresh air into the exhaust for a short time after cold starts, seems stuck on.

Can I drive with code P2446?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes P2446?

Common possibilities to test include: stuck air pump relay; shorted pump control wiring; stuck switching valve or faulty pressure sensor; engine computer problem (rare). A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.