Home › Code lookup › P2449
Powertrain code · Emissions

P2449 Secondary Air Injection System High Airflow Bank 2

How urgent? Book a check when convenient

What it means

More air than expected is flowing through the secondary air system on bank 2 (the side of the engine opposite cylinder 1), often from a leak in the air hoses or exhaust after the valve.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Inspect secondary air hoses and valve connections
  2. Compare air pressure readings with the pump running

Signs you may notice

  • Check engine light on
  • Usually no change in how the car drives
  • May fail an emissions inspection

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonDisconnected or cracked secondary air hose
  • CommonLeak at the switching valve or exhaust connection
  • PossibleFaulty air pressure sensor

Typical repair once the cause is confirmed

Repair the leak or replace the faulty valve or sensor.

Repair costInsufficient verified pricing for this vehicle and repair
Replace secondary air hose or valve. Prepare an itemized shop request.

Common questions

What does P2449 mean?

More air than expected is flowing through the secondary air system on bank 2 (the side of the engine opposite cylinder 1), often from a leak in the air hoses or exhaust after the valve.

Can I drive with code P2449?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes P2449?

Common possibilities to test include: disconnected or cracked secondary air hose; leak at the switching valve or exhaust connection; faulty air pressure sensor. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.