P2457 Exhaust Gas Recirculation Cooling System Performance
What it means
The EGR cooler, which cools exhaust gas before it's fed back into a diesel engine, isn't cooling it as much as it should. It is often clogged with soot.
Can I keep driving?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Compare EGR temperature readings before and after the cooler
- Check coolant level and look for coolant loss
Signs you may notice
- Check engine light on
- Possible loss of power
- Possible white smoke or coolant loss if the cooler leaks
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonSoot-clogged EGR cooler
- CommonStuck EGR cooler bypass valve
- PossibleFaulty EGR temperature sensor
- PossibleLow coolant or weak coolant flow
Typical repair once the cause is confirmed
Clean or replace the clogged EGR cooler and fix any stuck bypass valve.
Where it shows up
- Known on Ford Power Stroke 6.4L and 6.7L diesel pickups
Common questions
What does P2457 mean?
The EGR cooler, which cools exhaust gas before it's fed back into a diesel engine, isn't cooling it as much as it should. It is often clogged with soot.
Can I drive with code P2457?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What causes P2457?
Common possibilities to test include: soot-clogged egr cooler; stuck egr cooler bypass valve; faulty egr temperature sensor; low coolant or weak coolant flow. A shop should confirm the cause before replacing parts.