Home › Code lookup › U0424
Network code · Network

U0424 Invalid Data Received From HVAC Control Module

How urgent? Book a check when convenient

What it means

Another module received a message from the heating and A/C control module that does not make sense, such as a value that is out of range or does not add up. It runs the heating and air conditioning.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Check the heating and A/C control module for its own stored codes and fix those first
  2. Test the battery and grounds
  3. Check for software updates or service bulletins

Signs you may notice

  • Heat or A/C may not work or controls may not respond
  • Blower may stay on one speed

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonFaulty sensor or input feeding the heating and A/C control module
  • CommonThe heating and A/C control module needs a software update
  • CommonLow battery voltage or poor ground causing bad messages
  • PossibleNetwork wiring problem or interference
  • PossibleFailed heating and A/C control module

Typical repair once the cause is confirmed

Fix any fault in the heating and A/C control module or its sensors, then update the software if needed.

Walk through it step by step: A/C blows warm air →

Common questions

What does U0424 mean?

Another module received a message from the heating and A/C control module that does not make sense, such as a value that is out of range or does not add up. It runs the heating and air conditioning.

Can I drive with code U0424?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes U0424?

Common possibilities to test include: faulty sensor or input feeding the heating and a/c control module; the heating and a/c control module needs a software update; low battery voltage or poor ground causing bad messages; network wiring problem or interference. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.