U0425 Invalid Data Received From Auxiliary Heater Control Module
What it means
Another module received a message from the auxiliary heater module that does not make sense, such as a value that is out of range or does not add up. It runs the heating and air conditioning.
Can I keep driving?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Check the auxiliary heater module for its own stored codes and fix those first
- Test the battery and grounds
- Check for software updates or service bulletins
Signs you may notice
- Heat or A/C may not work or controls may not respond
- Blower may stay on one speed
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonFaulty sensor or input feeding the auxiliary heater module
- CommonThe auxiliary heater module needs a software update
- CommonLow battery voltage or poor ground causing bad messages
- PossibleNetwork wiring problem or interference
- PossibleFailed auxiliary heater module
Typical repair once the cause is confirmed
Fix any fault in the auxiliary heater module or its sensors, then update the software if needed.
Common questions
What does U0425 mean?
Another module received a message from the auxiliary heater module that does not make sense, such as a value that is out of range or does not add up. It runs the heating and air conditioning.
Can I drive with code U0425?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What causes U0425?
Common possibilities to test include: faulty sensor or input feeding the auxiliary heater module; the auxiliary heater module needs a software update; low battery voltage or poor ground causing bad messages; network wiring problem or interference. A shop should confirm the cause before replacing parts.