P0021 "A" Camshaft Position - Timing Over-Advanced or System Performance (Bank 2)
What it means
The "A" (usually intake) camshaft on bank 2 is further ahead of, or not following, the position the computer asked for. The variable valve timing system is not controlling it correctly.
Can I keep driving?
Check the oil level first; low or dirty oil is a common cause. If the engine runs smoothly, drive gently to a shop soon. If it stalls, runs very rough, loses power, rattles loudly or the oil light comes on, stop driving; low oil pressure or jumped timing can ruin the engine.
What to test before replacing parts
Check oil level, grade and condition, inspect the oil control valve screen, and compare commanded and actual cam position on a scan tool before replacing a phaser or timing chain.
- Check the oil level and change it if dirty or overdue, using the correct grade
- Remove and inspect the oil control valve for sludge or a stuck spool
- Check cam timing values with a scan tool before replacing the phaser or chain
Signs you may notice
- Check engine light on
- Rough idle, especially when warm
- Hesitation or loss of power
- Possible stalling or rattle at startup
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonLow, dirty or wrong-grade engine oil
- CommonSticking or failed camshaft oil control valve
- CommonCamshaft phaser stuck or worn
- PossibleStretched timing chain or jumped timing
- PossibleClogged oil screen at the oil control valve
Typical repair once the cause is confirmed
Start with an oil change. If it comes back, the oil control valve is the most common fix, then the phaser or timing chain.
Known on these vehicles
Common questions
What does P0021 mean?
The "A" (usually intake) camshaft on bank 2 is further ahead of, or not following, the position the computer asked for. The variable valve timing system is not controlling it correctly.
Can I drive with code P0021?
Check the oil level first; low or dirty oil is a common cause. If the engine runs smoothly, drive gently to a shop soon. If it stalls, runs very rough, loses power, rattles loudly or the oil light comes on, stop driving; low oil pressure or jumped timing can ruin the engine.
What causes P0021?
Common possibilities to test include: low, dirty or wrong-grade engine oil; sticking or failed camshaft oil control valve; camshaft phaser stuck or worn; stretched timing chain or jumped timing. A shop should confirm the cause before replacing parts.