Home › Code lookup › P0731
Powertrain code · Transmission

P0731 Gear 1 Incorrect Ratio

How urgent? Get it checked in the next few days

What it means

The computer compared the speeds going into and out of the transmission and found they don't match what first gear should give, which usually means something is slipping.

Can I keep driving?

Drive as little as possible. Slipping in first gear wears the transmission quickly and can get worse suddenly. If RPM flares, it won't go into gear, it's in limp mode or you smell burnt fluid, avoid highways and consider a tow. Short, gentle trips to a shop soon at most.

What to test before replacing parts

Check fluid level and condition, fix any solenoid or speed sensor codes first, then use scanner data and a pressure test to confirm the slip in first gear before a rebuild.

  1. Check fluid level, color and smell (dark or burnt fluid points to internal wear)
  2. Check for solenoid or speed sensor codes and fix those first
  3. Compare input and output speeds on a scanner in each gear

Signs you may notice

  • Check engine light on
  • Slipping or flaring RPM during or after a shift
  • Delayed, harsh or missing gear
  • Transmission may go into limp mode

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonLow, burnt or wrong transmission fluid
  • CommonWorn clutches or bands inside the transmission
  • CommonFaulty shift solenoid or pressure control solenoid
  • PossibleSticking valve in the valve body
  • PossibleFaulty input or output speed sensor

Typical repair once the cause is confirmed

Check and correct the fluid first. If solenoids and sensors test good, the transmission usually needs internal repair or a rebuild.

Repair costInsufficient verified pricing for this vehicle and repair
Rebuild automatic transmission. Prepare an itemized shop request.

Known on these vehicles

Walk through it step by step: Transmission slipping →

Common questions

What does P0731 mean?

The computer compared the speeds going into and out of the transmission and found they don't match what first gear should give, which usually means something is slipping.

Can I drive with code P0731?

Drive as little as possible. Slipping in first gear wears the transmission quickly and can get worse suddenly. If RPM flares, it won't go into gear, it's in limp mode or you smell burnt fluid, avoid highways and consider a tow. Short, gentle trips to a shop soon at most.

What causes P0731?

Common possibilities to test include: low, burnt or wrong transmission fluid; worn clutches or bands inside the transmission; faulty shift solenoid or pressure control solenoid; sticking valve in the valve body. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.