P0812 Reverse Input Circuit
What it means
There is an electrical problem in the circuit that tells the computer reverse gear has been selected.
Can I keep driving?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Check whether the backup lights come on in reverse
- Inspect the reverse switch or range sensor connector
Signs you may notice
- Check engine light on
- Backup lights or backup camera may not work
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonFailed reverse switch or range sensor
- CommonDamaged wiring or connector
- PossibleFaulty control module (rare)
Typical repair once the cause is confirmed
Repair the wiring or replace the reverse switch or range sensor.
Common questions
What does P0812 mean?
There is an electrical problem in the circuit that tells the computer reverse gear has been selected.
Can I drive with code P0812?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What causes P0812?
Common possibilities to test include: failed reverse switch or range sensor; damaged wiring or connector; faulty control module (rare). A shop should confirm the cause before replacing parts.