P0817 Starter Disable Circuit
What it means
The computer found an electrical problem in the circuit for the starter disable circuit, which lets the computer block the starter unless it is safe to crank, such as in Park or with the clutch pressed.
Can I keep driving?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Look over the wiring and connector at the starter disable circuit for damage, rubbing or corrosion
- Check related fuses, power and ground with a meter
- Test the starter disable circuit against the factory specification before replacing it
Signs you may notice
- Engine may not crank, or only cranks some of the time
- Check engine light on
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonFailed starter relay or starter disable relay
- PossiblePark/neutral or clutch switch problem
- CommonBroken or damaged wiring to the starter disable circuit
- CommonLoose, corroded or water-damaged connector
- PossibleBlown fuse or missing power or ground
- PossibleFaulty transmission or engine computer (rare)
Typical repair once the cause is confirmed
Repair any wiring or connector fault found; if the circuit tests good, replace the starter disable circuit.
Common questions
What does P0817 mean?
The computer found an electrical problem in the circuit for the starter disable circuit, which lets the computer block the starter unless it is safe to crank, such as in Park or with the clutch pressed.
Can I drive with code P0817?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What causes P0817?
Common possibilities to test include: failed starter relay or starter disable relay; park/neutral or clutch switch problem; broken or damaged wiring to the starter disable circuit; loose, corroded or water-damaged connector. A shop should confirm the cause before replacing parts.