P0818 Driveline Disconnect Switch Input Circuit
What it means
There is an electrical problem in the switch circuit that tells the computer whether part of the driveline has been disconnected, as on some 4WD and hybrid systems.
Can I keep driving?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Inspect the switch connector for corrosion or damage
- Watch the switch status on a scan tool while engaging and disengaging
Signs you may notice
- Check engine light on
- 4WD or AWD may not engage or disengage properly
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonFailed driveline disconnect switch
- CommonDamaged wiring or connector
- PossibleFaulty control module (rare)
Typical repair once the cause is confirmed
Repair the wiring or replace the disconnect switch.
Common questions
What does P0818 mean?
There is an electrical problem in the switch circuit that tells the computer whether part of the driveline has been disconnected, as on some 4WD and hybrid systems.
Can I drive with code P0818?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What causes P0818?
Common possibilities to test include: failed driveline disconnect switch; damaged wiring or connector; faulty control module (rare). A shop should confirm the cause before replacing parts.