Home › Code lookup › P0825
Powertrain code · Transmission

P0825 Gear Lever Push-Pull Switch (Shift Anticipate)

How urgent? Book a check when convenient

What it means

The switch that senses you are about to push or pull the gear lever has a fault, so the transmission computer cannot prepare for the shift.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Watch the switch status on a scan tool while moving the lever
  2. Inspect the shifter wiring and connector

Signs you may notice

  • Transmission warning or check engine light on
  • Slower or rougher shifts

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonFailed push-pull switch in the shifter
  • CommonDamaged wiring or connector
  • PossibleFaulty control module (rare)

Typical repair once the cause is confirmed

Repair the wiring or replace the shifter switch or shifter assembly.

Common questions

What does P0825 mean?

The switch that senses you are about to push or pull the gear lever has a fault, so the transmission computer cannot prepare for the shift.

Can I drive with code P0825?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes P0825?

Common possibilities to test include: failed push-pull switch in the shifter; damaged wiring or connector; faulty control module (rare). A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.