Home › Code lookup › P0827
Powertrain code · Transmission

P0827 Up and Down Shift Switch Circuit Low

How urgent? Book a check when convenient

What it means

The computer sees a signal or voltage in the up and down shift switch circuit that is lower than it should be. The shift switch sends your manual upshift and downshift requests (from the shifter or paddles) to the transmission computer.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Inspect the shift switch wiring for chafed spots touching metal
  2. Check the circuit for a short to ground with a meter
  3. Unplug the shift switch and see whether the reading changes

Signs you may notice

  • Manual or paddle shifting may not work
  • Check engine light on
  • Normal automatic shifting in Drive usually still works

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonWire shorted to ground in the shift switch circuit
  • CommonFailed up/down shift switch (internal short)
  • PossibleCorroded or water-damaged connector
  • PossibleFaulty control module (rare)

Typical repair once the cause is confirmed

Fix any shorted or damaged wiring; if the wiring is good, replace the shift switch.

Repair costInsufficient verified pricing for this vehicle and repair
Replace up/down shift switch. Prepare an itemized shop request.

Common questions

What does P0827 mean?

The computer sees a signal or voltage in the up and down shift switch circuit that is lower than it should be. The shift switch sends your manual upshift and downshift requests (from the shifter or paddles) to the transmission computer.

Can I drive with code P0827?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes P0827?

Common possibilities to test include: wire shorted to ground in the shift switch circuit; failed up/down shift switch (internal short); corroded or water-damaged connector; faulty control module (rare). A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.