Home › Code lookup › P0832
Powertrain code · Transmission

P0832 Clutch Pedal Switch A Circuit High

How urgent? Book a check when convenient

What it means

The computer sees a signal or voltage in the clutch pedal switch A circuit that is higher than it should be. The clutch pedal switch tells the computer when the clutch pedal is pressed, which matters for starting and cruise control.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Check the connector for pushed-out or loose pins
  2. Check the clutch pedal switch circuit for an open wire or a short to voltage
  3. Test the clutch pedal switch against the factory specification

Signs you may notice

  • Check engine light on
  • Engine may not crank with the clutch pressed
  • Cruise control may not work or may not cancel

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonOpen or broken wire in the clutch pedal switch circuit
  • CommonSwitch out of adjustment at the pedal
  • CommonFailed clutch pedal switch
  • PossibleWire shorted to another power circuit
  • PossiblePoor ground or loose connector
  • PossibleFaulty control module (rare)

Typical repair once the cause is confirmed

Repair the open or shorted wire or bad connector; if the wiring is good, replace the clutch pedal switch.

Repair costInsufficient verified pricing for this vehicle and repair
Replace clutch pedal switch. Prepare an itemized shop request.
Walk through it step by step: Car won't start →

Common questions

What does P0832 mean?

The computer sees a signal or voltage in the clutch pedal switch A circuit that is higher than it should be. The clutch pedal switch tells the computer when the clutch pedal is pressed, which matters for starting and cruise control.

Can I drive with code P0832?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes P0832?

Common possibilities to test include: open or broken wire in the clutch pedal switch circuit; switch out of adjustment at the pedal; failed clutch pedal switch; wire shorted to another power circuit. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.