P0833 Clutch Pedal Switch B Circuit
What it means
The computer found an electrical problem in the circuit for the clutch pedal switch B, which tells the computer when the clutch pedal is pressed, which matters for starting and cruise control.
Can I keep driving?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Look over the wiring and connector at the clutch pedal switch for damage, rubbing or corrosion
- Check related fuses, power and ground with a meter
- Test the clutch pedal switch against the factory specification before replacing it
Signs you may notice
- Check engine light on
- Engine may not crank with the clutch pressed
- Cruise control may not work or may not cancel
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonFailed clutch pedal switch
- CommonSwitch out of adjustment at the pedal
- CommonBroken or damaged wiring to the clutch pedal switch
- CommonLoose, corroded or water-damaged connector
- PossibleBlown fuse or missing power or ground
- PossibleFaulty transmission or engine computer (rare)
Typical repair once the cause is confirmed
Repair any wiring or connector fault found; if the circuit tests good, replace the clutch pedal switch.
Common questions
What does P0833 mean?
The computer found an electrical problem in the circuit for the clutch pedal switch B, which tells the computer when the clutch pedal is pressed, which matters for starting and cruise control.
Can I drive with code P0833?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What causes P0833?
Common possibilities to test include: failed clutch pedal switch; switch out of adjustment at the pedal; broken or damaged wiring to the clutch pedal switch; loose, corroded or water-damaged connector. A shop should confirm the cause before replacing parts.