P0850 Park/Neutral Switch Input Circuit
What it means
The computer found an electrical problem in the circuit for the park/neutral position switch, which tells the engine computer when the transmission is in Park or Neutral.
Can I keep driving?
Usually drivable, but the car may not start in Park, or might crank in gear. If the engine starts with the shifter in Drive or Reverse, don't drive it until it's fixed. Otherwise it's mostly an inconvenience; get it checked when you can and always set the parking brake.
What to test before replacing parts
Check the park/neutral switch reading on a scanner in each gear, its adjustment, the connector and the shift linkage before replacing the switch.
- Look over the wiring and connector at the park/neutral switch for damage, rubbing or corrosion
- Check related fuses, power and ground with a meter
- Test the park/neutral switch against the factory specification before replacing it
Signs you may notice
- Check engine light on
- Engine may not crank, or may only crank in Neutral
- Gear indicator or idle quality may be slightly off
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonFailed park/neutral position (range) switch
- CommonSwitch or shift cable out of adjustment
- CommonDamaged wiring or connector at the switch
- PossibleBlown fuse or missing power or ground
- PossibleFaulty transmission or engine computer (rare)
Typical repair once the cause is confirmed
Repair any wiring or connector fault found; if the circuit tests good, replace the park/neutral switch.
Common questions
What does P0850 mean?
The computer found an electrical problem in the circuit for the park/neutral position switch, which tells the engine computer when the transmission is in Park or Neutral.
Can I drive with code P0850?
Usually drivable, but the car may not start in Park, or might crank in gear. If the engine starts with the shifter in Drive or Reverse, don't drive it until it's fixed. Otherwise it's mostly an inconvenience; get it checked when you can and always set the parking brake.
What causes P0850?
Common possibilities to test include: failed park/neutral position (range) switch; switch or shift cable out of adjustment; damaged wiring or connector at the switch; blown fuse or missing power or ground. A shop should confirm the cause before replacing parts.