P0860 Gear Shift Module Communication Circuit
What it means
The computer found an electrical problem in the circuit for the gear shift module communication circuit, which carries messages between the shifter module and the transmission computer.
Can I keep driving?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Look over the wiring and connector at the shift module data line for damage, rubbing or corrosion
- Check related fuses, power and ground with a meter
- Test the shift module data line against the factory specification before replacing it
Signs you may notice
- Check engine light on
- Shifter or gear display may not respond correctly
- Transmission may go into a default gear
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonFailed gear shift (shifter) module
- CommonBroken or damaged wiring to the shift module data line
- CommonLoose, corroded or water-damaged connector
- PossibleBlown fuse or missing power or ground
- PossibleFaulty transmission or engine computer (rare)
Typical repair once the cause is confirmed
Repair any wiring or connector fault found; if the circuit tests good, replace the shift module data line.
Common questions
What does P0860 mean?
The computer found an electrical problem in the circuit for the gear shift module communication circuit, which carries messages between the shifter module and the transmission computer.
Can I drive with code P0860?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What causes P0860?
Common possibilities to test include: failed gear shift (shifter) module; broken or damaged wiring to the shift module data line; loose, corroded or water-damaged connector; blown fuse or missing power or ground. A shop should confirm the cause before replacing parts.