Home › Code lookup › P0885
Powertrain code · Electrical

P0885 TCM Power Relay Control Circuit/Open

How urgent? Get it checked in the next few days

What it means

The computer found an electrical problem in the circuit for the transmission computer (TCM) power relay control circuit, which switches main power on to the transmission computer.

Can I keep driving?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Look over the wiring and connector at the TCM power relay for damage, rubbing or corrosion
  2. Check related fuses, power and ground with a meter
  3. Test the TCM power relay against the factory specification before replacing it

Signs you may notice

  • Check engine light on
  • Transmission may be stuck in one gear (limp mode)
  • No shifting or harsh shifting

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonFailed TCM power relay
  • CommonBroken or damaged wiring to the TCM power relay
  • CommonLoose, corroded or water-damaged connector
  • PossibleBlown fuse or missing power or ground
  • PossibleFaulty transmission or engine computer (rare)

Typical repair once the cause is confirmed

Repair any wiring or connector fault found; if the circuit tests good, replace the TCM power relay.

Repair costInsufficient verified pricing for this vehicle and repair
Replace TCM power relay. Prepare an itemized shop request.

Common questions

What does P0885 mean?

The computer found an electrical problem in the circuit for the transmission computer (TCM) power relay control circuit, which switches main power on to the transmission computer.

Can I drive with code P0885?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What causes P0885?

Common possibilities to test include: failed tcm power relay; broken or damaged wiring to the tcm power relay; loose, corroded or water-damaged connector; blown fuse or missing power or ground. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.