P0890 TCM Power Relay Sense Circuit Low
What it means
The computer sees a signal or voltage in the transmission computer (TCM) power relay sense circuit circuit that is lower than it should be. The TCM power relay lets the transmission computer confirm its power relay has switched on.
Can I keep driving?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Inspect the TCM power relay wiring for chafed spots touching metal
- Check the circuit for a short to ground with a meter
- Unplug the TCM power relay and see whether the reading changes
Signs you may notice
- Check engine light on
- Transmission may be stuck in one gear (limp mode)
- No shifting or harsh shifting
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonWire shorted to ground in the TCM power relay circuit
- PossibleWeak battery or charging problem
- CommonFailed TCM power relay (internal short)
- PossibleCorroded or water-damaged connector
- PossibleFaulty control module (rare)
Typical repair once the cause is confirmed
Fix any shorted or damaged wiring; if the wiring is good, replace the TCM power relay.
Known on these vehicles
Common questions
What does P0890 mean?
The computer sees a signal or voltage in the transmission computer (TCM) power relay sense circuit circuit that is lower than it should be. The TCM power relay lets the transmission computer confirm its power relay has switched on.
Can I drive with code P0890?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What causes P0890?
Common possibilities to test include: wire shorted to ground in the tcm power relay circuit; weak battery or charging problem; failed tcm power relay (internal short); corroded or water-damaged connector. A shop should confirm the cause before replacing parts.