Home › Code lookup › P0893
Powertrain code · Transmission

P0893 Multiple Gears Engaged

How urgent? Stop driving as soon as it's safe. This can cause damage or be unsafe.

What it means

The transmission computer sees signs that more than one gear is engaged at the same time. This can lock up or jerk the drivetrain.

Can I keep driving?

No. Two gears engaged at once can bind or jerk the drivetrain, which may cause a sudden slowdown or loss of control. If it happened while driving, pull over safely and have it towed. Don't keep driving to see if it happens again.

What to test before replacing parts

Read all transmission codes, check fluid level and condition, and test shift solenoids, valve body operation and speed sensor data before deciding on internal repair.

  1. Check fluid level and condition
  2. Scan for solenoid and speed sensor codes
  3. Check gear ratio data on a scan tool during a road test

Signs you may notice

  • Sudden jerk, bind or slowdown while driving
  • Transmission warning or check engine light on
  • Transmission may go into limp mode

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonSticking shift solenoid or valve in the valve body
  • CommonLow or contaminated transmission fluid
  • PossibleClutch pack not releasing inside the transmission
  • PossibleFaulty speed sensor giving false readings

Typical repair once the cause is confirmed

Often a valve body or solenoid repair; internal clutch damage may need a rebuild.

Walk through it step by step: Transmission warning light on →

Common questions

What does P0893 mean?

The transmission computer sees signs that more than one gear is engaged at the same time. This can lock up or jerk the drivetrain.

Can I drive with code P0893?

No. Two gears engaged at once can bind or jerk the drivetrain, which may cause a sudden slowdown or loss of control. If it happened while driving, pull over safely and have it towed. Don't keep driving to see if it happens again.

What causes P0893?

Common possibilities to test include: sticking shift solenoid or valve in the valve body; low or contaminated transmission fluid; clutch pack not releasing inside the transmission; faulty speed sensor giving false readings. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.