P0100 Mass or Volume Air Flow Sensor "A" Circuit
What it means
The engine computer has lost a usable signal from the mass air flow (MAF) sensor, which measures how much air is entering the engine. Without it, the computer has to guess how much fuel to add.
Can I keep driving?
You can often drive gently to a shop, but it may run poorly. If the engine stalls, hesitates badly when pulling out or merging, or blows black smoke, keep trips short and avoid highways; a stall makes steering and braking much harder. Get it checked in the next few days.
What to test before replacing parts
Check that the MAF connector is seated and clean, test power, ground and signal wiring, and look for air leaks after the sensor before replacing the MAF.
- Make sure the MAF connector is fully plugged in and the pins are clean
- Look over the wiring near the air box for chafing or damage
- Check the sensor's power, ground and signal with a meter before replacing it
Signs you may notice
- Check engine light on
- Rough idle or stalling
- Hesitation when accelerating
- Worse fuel economy
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonUnplugged, loose or corroded MAF sensor connector
- CommonFailed mass air flow sensor
- PossibleDamaged wiring between the sensor and the engine computer
- PossibleBlown fuse or bad power or ground to the sensor
Typical repair once the cause is confirmed
Usually a connector or wiring repair, or a new mass air flow sensor if the sensor itself has failed.
Known on these vehicles
Common questions
What does P0100 mean?
The engine computer has lost a usable signal from the mass air flow (MAF) sensor, which measures how much air is entering the engine. Without it, the computer has to guess how much fuel to add.
Can I drive with code P0100?
You can often drive gently to a shop, but it may run poorly. If the engine stalls, hesitates badly when pulling out or merging, or blows black smoke, keep trips short and avoid highways; a stall makes steering and braking much harder. Get it checked in the next few days.
What causes P0100?
Common possibilities to test include: unplugged, loose or corroded maf sensor connector; failed mass air flow sensor; damaged wiring between the sensor and the engine computer; blown fuse or bad power or ground to the sensor. A shop should confirm the cause before replacing parts.