P0109 Manifold Absolute Pressure/Barometric Pressure Circuit Intermittent
What it means
The MAP sensor signal is dropping out or jumping around now and then, usually from a loose connection or a failing sensor.
Can I keep driving?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Wiggle-test the MAP connector and harness while watching the live reading
- Inspect the vacuum hose for cracks that open up when warm
Signs you may notice
- Check engine light on
- Occasional stumble or hesitation
- Problem comes and goes
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonLoose or corroded MAP connector
- CommonIntermittent break in the wiring
- PossibleFailing MAP sensor
Typical repair once the cause is confirmed
Repair the loose connection or wiring; replace the MAP sensor if the signal still drops out.
Common questions
What does P0109 mean?
The MAP sensor signal is dropping out or jumping around now and then, usually from a loose connection or a failing sensor.
Can I drive with code P0109?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What causes P0109?
Common possibilities to test include: loose or corroded map connector; intermittent break in the wiring; failing map sensor. A shop should confirm the cause before replacing parts.