Home › Code lookup › P010A
Powertrain code · Fuel and air

P010A Mass or Volume Air Flow Sensor "B" Circuit

How urgent? Get it checked in the next few days

What it means

Some engines use two air flow sensors. This code means the computer has lost a usable signal from the second one, called sensor B.

Can I keep driving?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Find which sensor is B for your engine and check its connector
  2. Test the sensor's power, ground and signal

Signs you may notice

  • Check engine light on
  • Rough running or hesitation
  • Possible reduced power

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonUnplugged or corroded sensor B connector
  • CommonFailed air flow sensor B
  • PossibleDamaged wiring to the sensor

Typical repair once the cause is confirmed

Repair the connector or wiring, or replace air flow sensor B.

Walk through it step by step: Check engine light on →

Common questions

What does P010A mean?

Some engines use two air flow sensors. This code means the computer has lost a usable signal from the second one, called sensor B.

Can I drive with code P010A?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What causes P010A?

Common possibilities to test include: unplugged or corroded sensor b connector; failed air flow sensor b; damaged wiring to the sensor. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.