P010D Mass or Volume Air Flow Sensor "B" Circuit High
What it means
The signal from the second air flow sensor (sensor B) is higher than it should ever be, usually from a short in the wiring or a failed sensor.
Can I keep driving?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Inspect the wiring for rubbed-through spots
- Check the sensor ground and signal voltage
Signs you may notice
- Check engine light on
- Rough running
- Poor fuel economy
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonFailed air flow sensor B
- CommonSignal wire shorted to voltage
- PossiblePoor sensor ground
Typical repair once the cause is confirmed
Repair the shorted wiring or replace air flow sensor B.
Common questions
What does P010D mean?
The signal from the second air flow sensor (sensor B) is higher than it should ever be, usually from a short in the wiring or a failed sensor.
Can I drive with code P010D?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What causes P010D?
Common possibilities to test include: failed air flow sensor b; signal wire shorted to voltage; poor sensor ground. A shop should confirm the cause before replacing parts.