Home › Code lookup › P010E
Powertrain code · Fuel and air

P010E Mass or Volume Air Flow Sensor "B" Circuit Intermittent/Erratic

How urgent? Book a check when convenient

What it means

The signal from the second air flow sensor (sensor B) keeps dropping out or jumping around, usually from a loose connection.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Wiggle-test the connector and harness while watching the live reading
  2. Inspect the connector pins for corrosion

Signs you may notice

  • Check engine light on
  • Occasional stumble or surge

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonLoose or corroded connector
  • CommonIntermittent wiring fault
  • PossibleFailing air flow sensor B

Typical repair once the cause is confirmed

Repair the loose connection or wiring; replace the sensor if the signal still drops out.

Walk through it step by step: Check engine light on →

Common questions

What does P010E mean?

The signal from the second air flow sensor (sensor B) keeps dropping out or jumping around, usually from a loose connection.

Can I drive with code P010E?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes P010E?

Common possibilities to test include: loose or corroded connector; intermittent wiring fault; failing air flow sensor b. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.