Home › Code lookup › P0112
Powertrain code · Fuel and air

P0112 Intake Air Temperature Sensor 1 Circuit Low (Bank 1)

How urgent? Book a check when convenient

What it means

The intake air temperature sensor is reporting an impossibly hot reading. That usually means its circuit is shorted or the sensor has failed.

Can I keep driving?

Usually you can keep driving and schedule a repair. The car may start harder in cold weather or use a bit more fuel. If it starts running rough, hesitating or stalling, or other codes show up, get it checked sooner.

What to test before replacing parts

Compare the intake air temperature reading to outside air on a cold engine, and check the connector and wiring for opens or shorts. The sensor may be built into the MAF.

  1. Read the live intake air temperature; a reading far above outside air on a cold engine points to a short
  2. Unplug the sensor and see if the reading drops to a very cold value
  3. Inspect the wiring for pinched or rubbed spots

Signs you may notice

  • Check engine light on
  • Possible hard starting when cold
  • Slight hesitation or lower fuel economy

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonFailed intake air temperature sensor
  • CommonSignal wire shorted to ground
  • PossibleDamaged connector
  • PossibleEngine computer fault

Typical repair once the cause is confirmed

Repair the shorted wiring or replace the intake air temperature sensor.

Repair costInsufficient verified pricing for this vehicle and repair
Replace intake air temperature sensor. Prepare an itemized shop request.
Walk through it step by step: Check engine light on →

Common questions

What does P0112 mean?

The intake air temperature sensor is reporting an impossibly hot reading. That usually means its circuit is shorted or the sensor has failed.

Can I drive with code P0112?

Usually you can keep driving and schedule a repair. The car may start harder in cold weather or use a bit more fuel. If it starts running rough, hesitating or stalling, or other codes show up, get it checked sooner.

What causes P0112?

Common possibilities to test include: failed intake air temperature sensor; signal wire shorted to ground; damaged connector; engine computer fault. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.