P0115 Engine Coolant Temperature Sensor 1 Circuit
What it means
There's an electrical problem with the coolant temperature sensor, which tells the computer how warm the engine is. It affects fuel mixture, idle and often the cooling fans.
Can I keep driving?
Watch for real overheating, since this code can make the gauge read wrong. If you see steam, smell coolant, the gauge reads high or the cooling fans aren't running, pull over and shut it off. Check the coolant level when the engine is cold. Otherwise get it to a shop soon.
What to test before replacing parts
Compare the coolant temperature reading to actual engine temperature with an infrared thermometer, check coolant level, and test the connector and wiring before replacing the sensor.
- Check the coolant level first
- Inspect the sensor connector and wiring
- Compare the live coolant temperature reading with the actual engine temperature
Signs you may notice
- Check engine light on
- Hard starting or rough running when cold
- Temperature gauge reading wrong or not moving
- Cooling fans may run all the time
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonFailed coolant temperature sensor
- CommonUnplugged or corroded sensor connector
- PossibleOpen or shorted wiring
- PossibleEngine computer fault
Typical repair once the cause is confirmed
Usually a new coolant temperature sensor or a connector repair.
Common questions
What does P0115 mean?
There's an electrical problem with the coolant temperature sensor, which tells the computer how warm the engine is. It affects fuel mixture, idle and often the cooling fans.
Can I drive with code P0115?
Watch for real overheating, since this code can make the gauge read wrong. If you see steam, smell coolant, the gauge reads high or the cooling fans aren't running, pull over and shut it off. Check the coolant level when the engine is cold. Otherwise get it to a shop soon.
What causes P0115?
Common possibilities to test include: failed coolant temperature sensor; unplugged or corroded sensor connector; open or shorted wiring; engine computer fault. A shop should confirm the cause before replacing parts.