Home › Code lookup › P0119
Powertrain code · Cooling

P0119 Engine Coolant Temperature Sensor 1 Circuit Intermittent/Erratic

How urgent? Get it checked in the next few days

What it means

The coolant temperature reading is jumping around or cutting out, usually from a loose connection, a failing sensor, or air in the cooling system.

Can I keep driving?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Check the coolant level and bleed air from the system
  2. Wiggle-test the connector while watching the live reading

Signs you may notice

  • Check engine light on
  • Temperature gauge jumping around
  • Cooling fans switching on and off oddly

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonLoose or corroded connector
  • CommonFailing coolant temperature sensor
  • PossibleLow coolant or air pocket at the sensor
  • PossibleIntermittent wiring break

Typical repair once the cause is confirmed

Top up and bleed the coolant, repair the connection, or replace the sensor.

Walk through it step by step: Temperature gauge goes up and down →

Common questions

What does P0119 mean?

The coolant temperature reading is jumping around or cutting out, usually from a loose connection, a failing sensor, or air in the cooling system.

Can I drive with code P0119?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What causes P0119?

Common possibilities to test include: loose or corroded connector; failing coolant temperature sensor; low coolant or air pocket at the sensor; intermittent wiring break. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.