Home › Code lookup › P011B
Powertrain code · Fuel and air

P011B Engine Coolant Temperature/Intake Air Temperature Correlation

How urgent? Book a check when convenient

What it means

After the car sits long enough to cool down, the coolant and intake air temperatures should be nearly the same. This code means they don't agree.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. After an overnight cool-down, compare the coolant and intake air readings to the actual outside temperature
  2. Ask whether a block heater was plugged in before the code set

Signs you may notice

  • Check engine light on
  • Usually no change in drivability

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonFaulty coolant temperature sensor
  • CommonFaulty intake air temperature sensor
  • PossibleBlock heater use before starting
  • PossibleCorroded connector or wiring fault

Typical repair once the cause is confirmed

Replace whichever sensor reads out of line with the real temperature.

Walk through it step by step: Check engine light on →

Common questions

What does P011B mean?

After the car sits long enough to cool down, the coolant and intake air temperatures should be nearly the same. This code means they don't agree.

Can I drive with code P011B?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes P011B?

Common possibilities to test include: faulty coolant temperature sensor; faulty intake air temperature sensor; block heater use before starting; corroded connector or wiring fault. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.