Home › Code lookup › P011C
Powertrain code · Fuel and air

P011C Charge Air Temperature/Intake Air Temperature Correlation (Bank 1)

How urgent? Book a check when convenient

What it means

On turbocharged or supercharged engines, the temperature of the boosted air and the incoming air should agree when the engine is cold. This code means they don't.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Compare both temperature readings after an overnight cool-down
  2. Inspect both sensor connectors for oil or corrosion

Signs you may notice

  • Check engine light on
  • Usually no change in drivability
  • Possible reduced power in some cases

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonFaulty charge air temperature sensor
  • CommonFaulty intake air temperature sensor
  • PossibleCorroded connector or wiring fault

Typical repair once the cause is confirmed

Replace the sensor that reads out of line, or repair the wiring.

Walk through it step by step: Check engine light on →

Common questions

What does P011C mean?

On turbocharged or supercharged engines, the temperature of the boosted air and the incoming air should agree when the engine is cold. This code means they don't.

Can I drive with code P011C?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes P011C?

Common possibilities to test include: faulty charge air temperature sensor; faulty intake air temperature sensor; corroded connector or wiring fault. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.