P0126 Insufficient Coolant Temperature for Stable Operation
What it means
The engine isn't staying warm enough for steady, efficient running. Most often the thermostat is stuck open or the coolant temperature sensor is reading low.
Can I keep driving?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Check the coolant level
- Watch the coolant temperature during a drive to see if it stays below normal
Signs you may notice
- Check engine light on
- Temperature gauge reads low
- Weak cabin heat
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonThermostat stuck open
- CommonFaulty coolant temperature sensor
- PossibleLow coolant level
Typical repair once the cause is confirmed
Usually a new thermostat; replace the coolant temperature sensor if it reads wrong.
Known on these vehicles
Common questions
What does P0126 mean?
The engine isn't staying warm enough for steady, efficient running. Most often the thermostat is stuck open or the coolant temperature sensor is reading low.
Can I drive with code P0126?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What causes P0126?
Common possibilities to test include: thermostat stuck open; faulty coolant temperature sensor; low coolant level. A shop should confirm the cause before replacing parts.