Home › Code lookup › P0136
Powertrain code · Emissions

P0136 O2 Sensor Circuit (Bank 1 Sensor 2)

How urgent? Book a check when convenient

What it means

There's a problem with the rear oxygen sensor on bank 1, the one after the catalytic converter. It mainly checks that the converter is doing its job.

Can I keep driving?

Usually you can keep driving normally and schedule a repair; this rear sensor mainly monitors the catalytic converter. The car may fail an emissions test. If the engine runs rough, the check engine light flashes, or you smell rotten eggs or fuel, get it checked sooner.

What to test before replacing parts

Inspect the wiring and connector under the car, check for exhaust leaks near the sensor, and watch its signal on a scan tool before replacing it.

  1. Inspect the sensor wiring and connector under the car for damage or corrosion
  2. Check for exhaust leaks near the converter
  3. Watch the live sensor reading on a warm engine

Signs you may notice

  • Check engine light on
  • Usually no change in how the car drives
  • May fail an emissions test

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonFailed downstream oxygen sensor
  • CommonDamaged wiring under the car
  • PossibleCorroded or loose connector
  • PossibleExhaust leak near the sensor

Typical repair once the cause is confirmed

Usually a new downstream oxygen sensor or a wiring repair.

Repair costInsufficient verified pricing for this vehicle and repair
Replace downstream oxygen sensor (bank 1). Prepare an itemized shop request.
Walk through it step by step: Check engine light on →

Common questions

What does P0136 mean?

There's a problem with the rear oxygen sensor on bank 1, the one after the catalytic converter. It mainly checks that the converter is doing its job.

Can I drive with code P0136?

Usually you can keep driving normally and schedule a repair; this rear sensor mainly monitors the catalytic converter. The car may fail an emissions test. If the engine runs rough, the check engine light flashes, or you smell rotten eggs or fuel, get it checked sooner.

What causes P0136?

Common possibilities to test include: failed downstream oxygen sensor; damaged wiring under the car; corroded or loose connector; exhaust leak near the sensor. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.