Home › Code lookup › P013A
Powertrain code · Emissions

P013A O2 Sensor Slow Response - Rich to Lean (Bank 1 Sensor 2)

How urgent? Book a check when convenient

What it means

The rear oxygen sensor on bank 1 is slow to react when the exhaust changes from rich to lean, such as when you lift off the gas.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Check for exhaust leaks near the sensor
  2. Watch the rear sensor drop toward lean during a coast-down from highway speed

Signs you may notice

  • Check engine light on
  • Usually no change in how the car drives

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonAged or contaminated downstream oxygen sensor
  • PossibleExhaust leak near the sensor
  • PossibleWiring or connector problem

Typical repair once the cause is confirmed

Usually a new downstream oxygen sensor.

Repair costInsufficient verified pricing for this vehicle and repair
Replace downstream oxygen sensor (bank 1). Prepare an itemized shop request.

Known on these vehicles

Walk through it step by step: Check engine light on →

Common questions

What does P013A mean?

The rear oxygen sensor on bank 1 is slow to react when the exhaust changes from rich to lean, such as when you lift off the gas.

Can I drive with code P013A?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes P013A?

Common possibilities to test include: aged or contaminated downstream oxygen sensor; exhaust leak near the sensor; wiring or connector problem. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.