P0141 O2 Sensor Heater Circuit (Bank 1 Sensor 2)
What it means
The heater inside the rear oxygen sensor on bank 1, which helps it warm up quickly, or the heater's wiring has a problem.
Can I keep driving?
Usually you can keep driving normally and schedule a repair; the heater only helps the oxygen sensor warm up quickly. Get it checked sooner if the engine starts running rough, other codes appear, or you smell fuel. The car may not pass an emissions or inspection test until it's fixed.
What to test before replacing parts
Check the O2 heater fuse first, then measure heater resistance and check power and ground at the connector. Inspect the wiring under the car for damage before replacing the sensor.
- Check the oxygen sensor heater fuse
- Measure the heater resistance at the sensor connector
- Inspect the wiring under the car for damage or corrosion
Signs you may notice
- Check engine light on
- Usually no change in how the car drives
- May fail an emissions test
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonBurned-out heater inside the oxygen sensor
- CommonBlown oxygen sensor heater fuse
- PossibleDamaged wiring or connector under the car
- PossibleFaulty heater control in the engine computer
Typical repair once the cause is confirmed
Usually a new downstream oxygen sensor; check the fuse and wiring first.
Common questions
What does P0141 mean?
The heater inside the rear oxygen sensor on bank 1, which helps it warm up quickly, or the heater's wiring has a problem.
Can I drive with code P0141?
Usually you can keep driving normally and schedule a repair; the heater only helps the oxygen sensor warm up quickly. Get it checked sooner if the engine starts running rough, other codes appear, or you smell fuel. The car may not pass an emissions or inspection test until it's fixed.
What causes P0141?
Common possibilities to test include: burned-out heater inside the oxygen sensor; blown oxygen sensor heater fuse; damaged wiring or connector under the car; faulty heater control in the engine computer. A shop should confirm the cause before replacing parts.