Home › Code lookup › P0148
Powertrain code · Fuel and air

P0148 Fuel Delivery Error

How urgent? Get it checked in the next few days

What it means

The fuel system isn't delivering the amount of fuel the computer asked for. This code is mostly seen on diesel engines and can cause power loss or stalling.

Can I keep driving?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Replace or check the fuel filter and drain any water
  2. Check fuel supply pressure and look for air in the fuel lines

Signs you may notice

  • Check engine light on
  • Loss of power
  • Hard starting or stalling

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonClogged fuel filter or weak lift pump
  • CommonAir getting into the fuel lines
  • PossibleWorn injection pump or faulty fuel quantity control
  • PossibleWiring fault to the pump control

Typical repair once the cause is confirmed

Often a fuel filter or lift pump; worn injection pumps need repair or replacement.

Walk through it step by step: Car has no power when accelerating →

Common questions

What does P0148 mean?

The fuel system isn't delivering the amount of fuel the computer asked for. This code is mostly seen on diesel engines and can cause power loss or stalling.

Can I drive with code P0148?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What causes P0148?

Common possibilities to test include: clogged fuel filter or weak lift pump; air getting into the fuel lines; worn injection pump or faulty fuel quantity control; wiring fault to the pump control. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.