Home › Code lookup › P0149
Powertrain code · Fuel and air

P0149 Fuel Timing Error

How urgent? Get it checked in the next few days

What it means

Fuel isn't being injected at the right moment. This is mostly a diesel code and usually points to a problem with the injection pump's timing control.

Can I keep driving?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Check for related sensor or fuel supply codes
  2. Have a shop compare desired and actual injection timing on a scan tool

Signs you may notice

  • Check engine light on
  • Hard starting, rough running or smoke
  • Loss of power

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonFaulty injection timing control on the pump
  • PossibleInjection pump timing set wrong after service
  • PossibleFaulty crank or pump position sensor
  • PossibleLow fuel supply or air in the fuel

Typical repair once the cause is confirmed

Repair the timing control, correct pump timing, or repair or replace the injection pump.

Walk through it step by step: Hard to start when cold →

Common questions

What does P0149 mean?

Fuel isn't being injected at the right moment. This is mostly a diesel code and usually points to a problem with the injection pump's timing control.

Can I drive with code P0149?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What causes P0149?

Common possibilities to test include: faulty injection timing control on the pump; injection pump timing set wrong after service; faulty crank or pump position sensor; low fuel supply or air in the fuel. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.