Home › Code lookup › P014E
Powertrain code · Emissions

P014E O2 Sensor Slow Response - Rich to Lean (Bank 2 Sensor 1)

How urgent? Book a check when convenient

What it means

The front oxygen sensor on bank 2 is slow to react when the exhaust changes from rich to lean. Because this sensor guides fuel control, mileage can suffer.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Check for exhaust leaks ahead of the sensor
  2. Check fuel trims and look for other fuel or misfire codes

Signs you may notice

  • Check engine light on
  • Possible lower fuel economy

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonAged or contaminated upstream oxygen sensor
  • PossibleExhaust leak ahead of the sensor
  • PossibleFuel mixture problem such as a leaking injector

Typical repair once the cause is confirmed

Usually a new upstream oxygen sensor.

Repair costInsufficient verified pricing for this vehicle and repair
Replace upstream oxygen sensor (bank 2). Prepare an itemized shop request.
Walk through it step by step: Gas mileage suddenly worse →

Common questions

What does P014E mean?

The front oxygen sensor on bank 2 is slow to react when the exhaust changes from rich to lean. Because this sensor guides fuel control, mileage can suffer.

Can I drive with code P014E?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes P014E?

Common possibilities to test include: aged or contaminated upstream oxygen sensor; exhaust leak ahead of the sensor; fuel mixture problem such as a leaking injector. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.