P0152 O2 Sensor Circuit High Voltage (Bank 2 Sensor 1)
What it means
The front oxygen sensor on bank 2 is stuck reading high, which looks like a rich (too much fuel) mixture. It can be a real rich condition or a shorted or contaminated sensor.
Can I keep driving?
Usually drivable for a short time, but get it checked soon. If you smell strong fuel, see black smoke, the light flashes or the engine runs rough, get it checked right away; a rich mixture can overheat and ruin the catalytic converter. If you find a fuel leak, don't drive it.
What to test before replacing parts
Review fuel trims and fuel pressure to rule out a real rich condition, check for a short to voltage, and look for coolant or oil contamination before replacing the sensor.
- Inspect the sensor wiring for melted spots
- Look at bank 2 fuel trims for a real rich condition
- Check for coolant loss or oil burning
Signs you may notice
- Check engine light on
- Lower fuel economy
- Possible fuel smell or black smoke
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonFailed or contaminated upstream oxygen sensor
- CommonSignal wire shorted to voltage
- PossibleReal rich condition from a leaking injector
- PossibleCoolant or oil burning and fouling the sensor
Typical repair once the cause is confirmed
Usually a new upstream oxygen sensor; fix any real rich condition first.
Common questions
What does P0152 mean?
The front oxygen sensor on bank 2 is stuck reading high, which looks like a rich (too much fuel) mixture. It can be a real rich condition or a shorted or contaminated sensor.
Can I drive with code P0152?
Usually drivable for a short time, but get it checked soon. If you smell strong fuel, see black smoke, the light flashes or the engine runs rough, get it checked right away; a rich mixture can overheat and ruin the catalytic converter. If you find a fuel leak, don't drive it.
What causes P0152?
Common possibilities to test include: failed or contaminated upstream oxygen sensor; signal wire shorted to voltage; real rich condition from a leaking injector; coolant or oil burning and fouling the sensor. A shop should confirm the cause before replacing parts.