Home › Code lookup › P0168
Powertrain code · Fuel and air

P0168 Fuel Temperature Too High

How urgent? Get it checked in the next few days

What it means

The fuel is hotter than it should be. This is mostly seen on diesels, where hot fuel can reduce power and is hard on the injection system.

Can I keep driving?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Compare the fuel temperature reading with other temperature sensors on a cold engine
  2. Inspect the fuel cooler for blockage or damage

Signs you may notice

  • Check engine light on
  • Reduced power, especially in hot weather
  • Possible hard starting when hot

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonFaulty fuel temperature sensor
  • CommonFuel cooler blocked or not working
  • PossibleRunning with a very low fuel level
  • PossibleWiring or connector fault

Typical repair once the cause is confirmed

Replace the fuel temperature sensor or repair the fuel cooling system.

Walk through it step by step: Car has no power when accelerating →

Common questions

What does P0168 mean?

The fuel is hotter than it should be. This is mostly seen on diesels, where hot fuel can reduce power and is hard on the injection system.

Can I drive with code P0168?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What causes P0168?

Common possibilities to test include: faulty fuel temperature sensor; fuel cooler blocked or not working; running with a very low fuel level; wiring or connector fault. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.