Home › Code lookup › P0169
Powertrain code · Fuel and air

P0169 Incorrect Fuel Composition

How urgent? Get it checked in the next few days

What it means

The computer thinks the fuel in the tank isn't what the engine should be running on, such as contaminated fuel or the wrong type of fuel.

Can I keep driving?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Think back to the last fill-up and whether the right fuel was used
  2. Take a fuel sample and check for water or the wrong fuel

Signs you may notice

  • Check engine light on
  • Rough running, hesitation or hard starting
  • Possible loss of power

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonWrong or contaminated fuel in the tank
  • CommonWater in the fuel
  • PossibleFaulty fuel composition sensor or its wiring

Typical repair once the cause is confirmed

Drain and replace bad fuel, replace filters, or repair the fuel composition sensor circuit.

Walk through it step by step: Engine sputters or misfires →

Common questions

What does P0169 mean?

The computer thinks the fuel in the tank isn't what the engine should be running on, such as contaminated fuel or the wrong type of fuel.

Can I drive with code P0169?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What causes P0169?

Common possibilities to test include: wrong or contaminated fuel in the tank; water in the fuel; faulty fuel composition sensor or its wiring. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.