Home › Code lookup › P0170
Powertrain code · Fuel and air

P0170 Fuel Trim (Bank 1)

How urgent? Get it checked in the next few days

What it means

The computer has had to adjust the fuel mixture on bank 1 beyond its normal limits to keep the engine running right. Something is throwing the air or fuel off.

Can I keep driving?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Check fuel trims to see if the engine is running lean or rich
  2. Look for vacuum leaks and inspect the intake ducting

Signs you may notice

  • Check engine light on
  • Rough idle or hesitation
  • Lower fuel economy

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonVacuum or intake air leak
  • CommonDirty or faulty mass air flow sensor
  • PossibleFuel pressure too low or too high
  • PossibleLeaking or clogged fuel injector

Typical repair once the cause is confirmed

Find and fix the air or fuel problem behind the trim, such as a vacuum leak or dirty MAF sensor.

Walk through it step by step: Rough idle or shaking when stopped →

Common questions

What does P0170 mean?

The computer has had to adjust the fuel mixture on bank 1 beyond its normal limits to keep the engine running right. Something is throwing the air or fuel off.

Can I drive with code P0170?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What causes P0170?

Common possibilities to test include: vacuum or intake air leak; dirty or faulty mass air flow sensor; fuel pressure too low or too high; leaking or clogged fuel injector. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.