Home › Code lookup › P0173
Powertrain code · Fuel and air

P0173 Fuel Trim (Bank 2)

How urgent? Get it checked in the next few days

What it means

The computer has had to adjust the fuel mixture on bank 2 beyond its normal limits. Something is throwing the air or fuel off on that side of the engine.

Can I keep driving?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Compare bank 1 and bank 2 fuel trims to see whether one side is off
  2. Look for vacuum leaks, especially on the bank 2 side of the intake

Signs you may notice

  • Check engine light on
  • Rough idle or hesitation
  • Lower fuel economy

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonVacuum or intake leak on bank 2
  • CommonDirty or faulty mass air flow sensor
  • PossibleLeaking or clogged fuel injector on bank 2
  • PossibleFuel pressure problem

Typical repair once the cause is confirmed

Find and fix the air or fuel problem behind the trim.

Walk through it step by step: Rough idle or shaking when stopped →

Common questions

What does P0173 mean?

The computer has had to adjust the fuel mixture on bank 2 beyond its normal limits. Something is throwing the air or fuel off on that side of the engine.

Can I drive with code P0173?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What causes P0173?

Common possibilities to test include: vacuum or intake leak on bank 2; dirty or faulty mass air flow sensor; leaking or clogged fuel injector on bank 2; fuel pressure problem. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.