P0175 System Too Rich (Bank 2)
What it means
The engine on bank 2 is getting too much fuel or not enough air, and the computer can't trim it back enough. It can hurt fuel economy and the catalytic converter over time.
Can I keep driving?
Usually drivable for a short time, but get it checked soon; extra fuel can foul plugs and overheat the catalytic converter. If you smell strong fuel, see heavy black smoke, the light flashes or the engine misfires, get it checked right away. If you find a fuel leak, don't drive it.
What to test before replacing parts
Compare bank 1 and bank 2 fuel trims, check fuel pressure and bank 2 injectors for leaks, and verify MAF and coolant temperature readings before replacing sensors.
- Check the air filter and clean or test the MAF sensor
- Check fuel pressure and look for leaking injectors
- Confirm the coolant temperature reading is correct
Signs you may notice
- Check engine light on
- Poor fuel economy
- Fuel smell or black smoke
- Rough idle or misfires
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonDirty or faulty mass air flow sensor
- CommonLeaking fuel injector on bank 2
- PossibleFaulty fuel pressure regulator or high fuel pressure
- PossibleFaulty coolant temperature sensor
- PossibleRestricted air filter or intake
Typical repair once the cause is confirmed
Often a MAF sensor cleaning or replacement; leaking injectors or a bad regulator also need replacing.
Common questions
What does P0175 mean?
The engine on bank 2 is getting too much fuel or not enough air, and the computer can't trim it back enough. It can hurt fuel economy and the catalytic converter over time.
Can I drive with code P0175?
Usually drivable for a short time, but get it checked soon; extra fuel can foul plugs and overheat the catalytic converter. If you smell strong fuel, see heavy black smoke, the light flashes or the engine misfires, get it checked right away. If you find a fuel leak, don't drive it.
What causes P0175?
Common possibilities to test include: dirty or faulty mass air flow sensor; leaking fuel injector on bank 2; faulty fuel pressure regulator or high fuel pressure; faulty coolant temperature sensor. A shop should confirm the cause before replacing parts.