P0178 Fuel Composition Sensor Circuit Low
What it means
The flex-fuel sensor's signal is lower than its normal range, usually from a wiring problem or a failed sensor.
Can I keep driving?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Inspect the sensor connector and wiring
- Check the sensor's power, ground and signal
Signs you may notice
- Check engine light on
- Possible hard starting or rough running
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonFailed fuel composition sensor
- CommonSignal wire open or shorted to ground
- PossibleCorroded connector
Typical repair once the cause is confirmed
Repair the wiring or replace the fuel composition sensor.
Common questions
What does P0178 mean?
The flex-fuel sensor's signal is lower than its normal range, usually from a wiring problem or a failed sensor.
Can I drive with code P0178?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What causes P0178?
Common possibilities to test include: failed fuel composition sensor; signal wire open or shorted to ground; corroded connector. A shop should confirm the cause before replacing parts.