Home › Code lookup › P0191
Powertrain code · Fuel and air

P0191 Fuel Rail Pressure Sensor "A" Circuit Range/Performance

How urgent? Get it checked in the next few days

What it means

The fuel rail pressure reading doesn't match what the computer expects. Fuel pressure may really be wrong, or the sensor may be giving bad readings.

Can I keep driving?

Limit driving. This fault can cause sudden power loss, limp mode or stalling, which is risky in traffic or on the highway. If the engine stalls, struggles to restart, or you smell fuel, don't keep driving. If it runs normally, keep trips short and get it checked soon.

What to test before replacing parts

Compare the sensor reading to a mechanical fuel pressure gauge to tell a bad sensor from a real pressure problem, then check the filter, pump and regulator.

  1. Compare the sensor reading with key on, engine off to the expected value
  2. Compare desired and actual rail pressure while driving
  3. Check the fuel filter and supply pressure

Signs you may notice

  • Check engine light on
  • Hard starting or long cranking
  • Hesitation or loss of power
  • Possible stalling

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonFaulty fuel rail pressure sensor
  • CommonReal fuel pressure problem such as a weak pump or clogged filter
  • PossibleFaulty fuel pressure regulator or control valve
  • PossibleCorroded connector or wiring fault

Typical repair once the cause is confirmed

Often a new fuel rail pressure sensor; fix any real fuel supply or regulator problem first.

Repair costInsufficient verified pricing for this vehicle and repair
Replace fuel rail pressure sensor. Prepare an itemized shop request.

Where it shows up

  • Seen on diesels and direct-injection gas engines that run a high-pressure fuel rail

Known on these vehicles

Walk through it step by step: Car has no power when accelerating →

Common questions

What does P0191 mean?

The fuel rail pressure reading doesn't match what the computer expects. Fuel pressure may really be wrong, or the sensor may be giving bad readings.

Can I drive with code P0191?

Limit driving. This fault can cause sudden power loss, limp mode or stalling, which is risky in traffic or on the highway. If the engine stalls, struggles to restart, or you smell fuel, don't keep driving. If it runs normally, keep trips short and get it checked soon.

What causes P0191?

Common possibilities to test include: faulty fuel rail pressure sensor; real fuel pressure problem such as a weak pump or clogged filter; faulty fuel pressure regulator or control valve; corroded connector or wiring fault. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.